- Forum
- Communities
- Enterprise Imaging
- Vote by Dec 20, 2019: Supplement 208: DICOM Encapsulation of OBJ Models for 3D Manufacturing and Virtual Reality
Vote by Dec 20, 2019: Supplement 208: DICOM Encapsulation of OBJ Models for 3D Manufacturing and Virtual Reality
- Andrea MacLean
- Topic Author
- Offline
- Posts: 317
4 years 11 months ago #5489
by Andrea MacLean
Vote by Dec 20, 2019: Supplement 208: DICOM Encapsulation of OBJ Models for 3D Manufacturing and Virtual Reality was created by Andrea MacLean
Dear EI community:
There is another DICOM ballot for Canada's consideration. Please review the note below and the materials posted to the forum.
I would like to vote on your behalf by Dec 20 as I am on vacation on Jan 3 and want to ensure that your voice is heard.
Thank you
Regards,
Andrea
To: DICOM Standard Committee (DSC) Voting and Alternate Voting Members
Letter Ballot seeking DICOM Standard Committee (DSC) approval of the Proposed DICOM Supplement: Supplement 208: DICOM Encapsulation of OBJ Models for 3D Manufacturing and Virtual Reality
Ballot opens: 2019-11-15
Ballot closes: 2020-01-03
Scope and Field of Application
This supplement extends the DICOM Standard to better address medical 3D manufacturing and uses of Virtual Reality, Augmented Reality, and Mixed Reality.
These extensions fall in three areas:
1) Support for a new 3D model type: Object File (OBJ)
2) Identification of models for assembly into a larger object
3) Capturing a preferred color for manufacturing or display of a model
OBJ Encapsulation
The supplement incorporates not just Object Files (OBJ), and also any supporting Material Library Files (MTL) and texture map files (JPG or PNG) on which an OBJ may rely.
As with Encapsulated STL, the new Encapsulated OBJ, Encapsulated MTL and texture image IODs allow 3D manufacturing models to be exchanged between various types of equipment using DICOM messages. This adds the ability to store, query and retrieve complete OBJ models as DICOM Instances. Updates are addressed by storing new instances, with reference back to earlier instances in a manner similar to the IOD for STL encapsulation.
Who can vote? Only the designated Primary voting representatives of the DSC member organizations/companies are invited and entitled to vote. (Votes may also be submitted by the designated Alternate voting representatives, on behalf of the Primary representative.) (Others in the DICOM Community will receive a copy of this ballot as a courtesy so that all will be apprised of anticipated extensions to the DICOM Standard.)
Instructions for accessing the documents and submitting comments:
1. As noted above the DICOM Secretariat (MITA/NEMA) uses a third party software. I want to mention that it is no longer called “KAVI”, the new name for this platform is “Higher Logic” or the distribution of this Letter Ballot and collection of the responses and comments.
2. To access NEMA/Higher Logic: an ‘account’ has been set up and an individual password has been assigned by NEMA for all Primary and Alternate voting members of the DSC. Some members have already used this ‘account’ to access other NEMA workspaces. Others may not have used it or forgot the password. When clicking on the below links for the first time you will be prompted to enter your e-mail and password to gain access. If you do not know or forgot your password, click right-away on ‘forgot password’ and follow the instructions. If any problems, please contact the NEMA Webmaster This email address is being protected from spambots. You need JavaScript enabled to view it.
3. To Download document(s) to local drives:
Click on the ‘Download’ links below to download the Word and/or PDF versions of the draft Supplement. If the Word and PDF versions differ, the PDF version governs. The access dialog box may appear; follow instructions in par. 2 above to log in/access.
4. Submit Votes/Comment(s):
Click on the ‘Vote/Comment’ link below. The access dialog box may appear; follow instructions in par. 2 above to log-in/access. Thereafter enter your vote. If you wish to comment (or must comment with a negative vote) the comment-submission-template appears. Please complete the mandatory fields. Generally do not check the ‘Notify all members….’ option in order to reduce e-mails but check the other two notify options.
Forms of comments:
· You may enter text, or attach a document containing your comments, or mark-up parts or the whole of the document and attach same.
· If your comments relate to several specific sections you can combine them in a single comment entry or make separate comment entries.
Your vote may be:
In the old ballots In this new ‘Higher Logic ’ ballot
· Approve select “Affirmative” in the “Ballot Options” section of the form
· Approve with comments select “Affirmative” and click on “Add Comment” in the “Comments” section
· Disapprove (comments required) select “Negative”- you must click on “Add
Comment” and “Save” the comment
· Abstain select “Abstain” as a “Ballot Option”
· Abstain with comments. select “Abstain” and click on “Add
Comment” in the “Comments” section
Note: A negative vote should be accompanied by comment(s) on the particular paragraph or area with which the voter takes exception. The objections or concerns cannot be properly addressed without pertinent comments. (However, you do not need to cast a negative vote in order to comment.)
Word version of the file can be found here: infocentral.infoway-inforoute.ca/en/resources/docs/imagingdocs/dicom/3103-supplement-208-dicom-encapsulation-of-obj-models-for-3d-manufacturing-and-virtual-reality-word
PowerPoint version can be found here: infocentral.infoway-inforoute.ca/en/resources/docs/imagingdocs/dicom/3104-supplement-208-dicom-encapsulation-of-obj-models-for-3d-manufacturing-and-virtual-reality-ppt
There is another DICOM ballot for Canada's consideration. Please review the note below and the materials posted to the forum.
I would like to vote on your behalf by Dec 20 as I am on vacation on Jan 3 and want to ensure that your voice is heard.
Thank you
Regards,
Andrea
To: DICOM Standard Committee (DSC) Voting and Alternate Voting Members
Letter Ballot seeking DICOM Standard Committee (DSC) approval of the Proposed DICOM Supplement: Supplement 208: DICOM Encapsulation of OBJ Models for 3D Manufacturing and Virtual Reality
Ballot opens: 2019-11-15
Ballot closes: 2020-01-03
Scope and Field of Application
This supplement extends the DICOM Standard to better address medical 3D manufacturing and uses of Virtual Reality, Augmented Reality, and Mixed Reality.
These extensions fall in three areas:
1) Support for a new 3D model type: Object File (OBJ)
2) Identification of models for assembly into a larger object
3) Capturing a preferred color for manufacturing or display of a model
OBJ Encapsulation
The supplement incorporates not just Object Files (OBJ), and also any supporting Material Library Files (MTL) and texture map files (JPG or PNG) on which an OBJ may rely.
As with Encapsulated STL, the new Encapsulated OBJ, Encapsulated MTL and texture image IODs allow 3D manufacturing models to be exchanged between various types of equipment using DICOM messages. This adds the ability to store, query and retrieve complete OBJ models as DICOM Instances. Updates are addressed by storing new instances, with reference back to earlier instances in a manner similar to the IOD for STL encapsulation.
Who can vote? Only the designated Primary voting representatives of the DSC member organizations/companies are invited and entitled to vote. (Votes may also be submitted by the designated Alternate voting representatives, on behalf of the Primary representative.) (Others in the DICOM Community will receive a copy of this ballot as a courtesy so that all will be apprised of anticipated extensions to the DICOM Standard.)
Instructions for accessing the documents and submitting comments:
1. As noted above the DICOM Secretariat (MITA/NEMA) uses a third party software. I want to mention that it is no longer called “KAVI”, the new name for this platform is “Higher Logic” or the distribution of this Letter Ballot and collection of the responses and comments.
2. To access NEMA/Higher Logic: an ‘account’ has been set up and an individual password has been assigned by NEMA for all Primary and Alternate voting members of the DSC. Some members have already used this ‘account’ to access other NEMA workspaces. Others may not have used it or forgot the password. When clicking on the below links for the first time you will be prompted to enter your e-mail and password to gain access. If you do not know or forgot your password, click right-away on ‘forgot password’ and follow the instructions. If any problems, please contact the NEMA Webmaster This email address is being protected from spambots. You need JavaScript enabled to view it.
3. To Download document(s) to local drives:
Click on the ‘Download’ links below to download the Word and/or PDF versions of the draft Supplement. If the Word and PDF versions differ, the PDF version governs. The access dialog box may appear; follow instructions in par. 2 above to log in/access.
4. Submit Votes/Comment(s):
Click on the ‘Vote/Comment’ link below. The access dialog box may appear; follow instructions in par. 2 above to log-in/access. Thereafter enter your vote. If you wish to comment (or must comment with a negative vote) the comment-submission-template appears. Please complete the mandatory fields. Generally do not check the ‘Notify all members….’ option in order to reduce e-mails but check the other two notify options.
Forms of comments:
· You may enter text, or attach a document containing your comments, or mark-up parts or the whole of the document and attach same.
· If your comments relate to several specific sections you can combine them in a single comment entry or make separate comment entries.
Your vote may be:
In the old ballots In this new ‘Higher Logic ’ ballot
· Approve select “Affirmative” in the “Ballot Options” section of the form
· Approve with comments select “Affirmative” and click on “Add Comment” in the “Comments” section
· Disapprove (comments required) select “Negative”- you must click on “Add
Comment” and “Save” the comment
· Abstain select “Abstain” as a “Ballot Option”
· Abstain with comments. select “Abstain” and click on “Add
Comment” in the “Comments” section
Note: A negative vote should be accompanied by comment(s) on the particular paragraph or area with which the voter takes exception. The objections or concerns cannot be properly addressed without pertinent comments. (However, you do not need to cast a negative vote in order to comment.)
Word version of the file can be found here: infocentral.infoway-inforoute.ca/en/resources/docs/imagingdocs/dicom/3103-supplement-208-dicom-encapsulation-of-obj-models-for-3d-manufacturing-and-virtual-reality-word
PowerPoint version can be found here: infocentral.infoway-inforoute.ca/en/resources/docs/imagingdocs/dicom/3104-supplement-208-dicom-encapsulation-of-obj-models-for-3d-manufacturing-and-virtual-reality-ppt
Please Log in or Create an account to join the conversation.